Talk to salesApplication support & quotations xiao@ahtyck.com +86 180 1992 6927 WhatsApp Get a Quote
Anhui Tongyi Measurement and Control Technology Co., Ltd. Logo TYCK InstrumentsAnhui Tongyi Measurement and Control Technology Co., Ltd. +86 180 1992 6927

TYCK FLOW Measurement Series

TYCK FE210 Integrated Electromagnetic Flowmeter

TYCK FLOW series · Configurable industrial instrument

TYCK FE210 Integrated Electromagnetic Flowmeter
Electromagnetic Flowmeters

TYCK FE210 Integrated Electromagnetic Flowmeter

TYCK FLOW series · Configurable industrial instrument

SKU

Model Selection

2 configurations

Select a SKU to review its name and image. Technical values are released only after engineering verifies the controlled source.

Selected Model

FE210 Configurable VersionFE210-CONFIG
Specifications

Held for engineering verification. Submit the application conditions to receive the controlled values.

Consult Selected SKU

Product Overview

Product Description

The TYCK FE210 is an integrated electromagnetic flowmeter platform for electrically conductive liquids in full-pipe applications.

Typical application contexts include Water and wastewater, Conductive chemical liquids, Slurry service with material review. Final suitability depends on the actual medium, operating envelope, installation and selected SKU.

Selection focus

  • Conductivity and fluid condition
  • Pipe size and full-pipe state
  • Liner, electrode and grounding
  • Flow range and installation layout

Limitations

  • It is not intended for non-conductive fluids or gases.
  • Liner and electrode compatibility require verification.

Final dimensions, ratings, materials, output, certification and supply scope are configured for the application and confirmed in the quotation.

PRODUCT DATA

Technical Facts

Use these comparable fields to shortlist the product. The selected SKU, controlled datasheet and TYCK quotation confirm the ordered range, accuracy, materials, connection and output.

Engineering verification in progress

Numeric performance and configuration values are held in the internal product record until TYCK engineering verifies the source and approves this product. Send the application conditions to receive a controlled selection and quotation.

SKU Matrix

Available Models

2 configurations. Each SKU has an independent parameter set in the CMS; values are published only after technical verification.

SKU CodeModelSpecificationsUnit
FE210-CONFIGFE210 Configurable VersionHeld for engineering verification—
FE210-STD-REVIEWFE210 Standard Configurable VersionHeld for engineering verification—

APPLICATION REVIEW

Selection inputs and installation checks

These checklists identify the information still required; they do not add unverified performance claims to this product.

Provide conductivity and fluid condition, pipe size and full-pipe state, liner, electrode and grounding, flow range and installation layout for technical review.

Selection inputs to send

  1. Flow taskState liquid, gas or steam service, pipe size and the expected minimum, normal and maximum flow.
  2. Medium propertiesProvide composition and relevant conductivity, density, viscosity, solids, bubbles or phase-change information.
  3. Operating envelopeGive normal and limit pressure and temperature together with expected process variation.
  4. Piping and installationProvide pipe material, lining or connection, orientation, straight runs, nearby valves, bends, pumps and vibration.
  5. Electrical and project scopeConfirm power, output, communication, area classification, required documents, quantity and destination.

Installation review before order

  • Confirm pipe size, schedule or internal diameter, connection, orientation and whether the pipe remains full where required.
  • Record upstream and downstream disturbances, available straight runs, valves, pumps, vibration and support.
  • Verify wetted materials, liner or sensor construction against the actual medium and cleaning method.
  • Review enclosure location, cable route, power, grounding and output wiring.
  • Use the selected model installation manual and approved piping drawing before installation or commissioning.

Confirmation boundary: final model, materials, ratings, connection and supply scope must come from the selected SKU, controlled documentation and formal quotation.

Send This Selection Brief

RELATED PATHS

Solutions and technical resources

Use these internal guides to describe the application before requesting a specific configuration.

FAQ

Frequently Asked Questions

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What is the primary selection focus for TYCK FE210?

Confirm conductivity and fluid condition, pipe size and full-pipe state, liner, electrode and grounding before choosing a configuration.

Where is TYCK FE210 typically considered?

Initial application contexts include Water and wastewater, Conductive chemical liquids, Slurry service with material review; final suitability still requires project data.

Can the final FE210 specification be confirmed from this page?

No. Ratings, materials, connections, output and approvals must be confirmed against the selected SKU and controlled technical documents.

Related Products

All Products →