Guided Wave Radar Level Transmitter

Name: TYCK LG270 Guided Wave Radar Level Transmitter
Brand: TYCK
SKU: LG270-CONFIG

Guided Wave Radar

TYCK LG270 Guided Wave Radar Level Transmitter

TYCK OCEAN series · Configurable industrial instrument

SKU

Model Selection

5 configurations

Select a SKU to review its name and image. Technical values are released only after engineering verifies the controlled source.

Selected Model

LG270 Configurable VersionLG270-CONFIG

Specifications

Held for engineering verification. Submit the application conditions to receive the controlled values.

Consult Selected SKU

Product Overview

Product Description

The TYCK LG270 is a probe-guided radar platform for continuous level or interface duties where a defined signal path is appropriate.

Typical application contexts include Process and storage vessels, Interface measurement review, Narrow vessels with a suitable probe path. Final suitability depends on the actual medium, operating envelope, installation and selected SKU.

Selection focus

Rod, cable or coaxial probe
Dielectric behavior and interface
Probe loading and buildup
Nozzle, vessel internals and agitation

Limitations

The probe must not contact moving internals.
Buildup and mechanical load require review.

Final dimensions, ratings, materials, output, certification and supply scope are configured for the application and confirmed in the quotation.

PRODUCT DATA

Technical Facts

Use these comparable fields to shortlist the product. The selected SKU, controlled datasheet and TYCK quotation confirm the ordered range, accuracy, materials, connection and output.

Engineering verification in progress

Numeric performance and configuration values are held in the internal product record until TYCK engineering verifies the source and approves this product. Send the application conditions to receive a controlled selection and quotation.

SKU Matrix

Available Models

5 configurations. Each SKU has an independent parameter set in the CMS; values are published only after technical verification.

SKU Code	Model	Specifications	Unit
`LG270-CONFIG`	LG270 Configurable Version	Held for engineering verification	—
`G270-132-01`	Rod type high-precision guided wave radar level meter anti-corrosion water level material level transmitter plug-in rod type acid-base	Held for engineering verification	piece
`G270-133-01`	Cable type guided wave radar level meter liquid level meter solid level meter cement silo level meter liquid level meter explosion-proof	Held for engineering verification	piece
`G270-134-01`	Cable type + flange high-precision guided wave radar level meter anti-corrosion water level material level transmitter suitable for liquids	Held for engineering verification	piece
`G270-136-01`	PTFE straight rod radar level gauge water level gauge sensing transmitter 80g intelligent high frequency guided wave protection	Held for engineering verification	piece

APPLICATION REVIEW

Selection inputs and installation checks

These checklists identify the information still required; they do not add unverified performance claims to this product.

Provide rod, cable or coaxial probe, dielectric behavior and interface, probe loading and buildup, nozzle, vessel internals and agitation for technical review.

Selection inputs to send

Measurement taskState continuous level, interface or high/low point detection and the required measuring range.
Medium behaviorIdentify liquid or bulk solid, density and dielectric or conductivity data where known, plus foam, dust, coating or agitation.
Vessel and mountingProvide vessel dimensions, nozzle size and position, internals, fill and discharge points, and available mounting.
Operating envelopeGive normal, minimum, maximum and upset pressure and temperature, including vapor or condensation.
Electrical and project scopeConfirm power, output, communication, area classification, required documents, quantity and destination.

Installation review before order

Confirm the nozzle, sensing path and measurement reference against the vessel drawing.
Check that internals, filling streams, agitators and expected buildup do not conflict with the proposed mounting.
Verify wetted materials, seals and process connection against the actual medium and cleaning method.
Review enclosure location, cable route, power, grounding and output wiring.
Use the selected model installation manual and approved project drawing before installation or commissioning.

Confirmation boundary: final model, materials, ratings, connection and supply scope must come from the selected SKU, controlled documentation and formal quotation.

Send This Selection Brief

RELATED PATHS

Solutions and technical resources

Use these internal guides to describe the application before requesting a specific configuration.

Solutions

Resources

FAQ

Frequently Asked Questions

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What is the primary selection focus for TYCK LG270?

Confirm rod, cable or coaxial probe, dielectric behavior and interface, probe loading and buildup before choosing a configuration.

Where is TYCK LG270 typically considered?

Initial application contexts include Process and storage vessels, Interface measurement review, Narrow vessels with a suitable probe path; final suitability still requires project data.

Can the final LG270 specification be confirmed from this page?

No. Ratings, materials, connections, output and approvals must be confirmed against the selected SKU and controlled technical documents.