Talk to salesApplication support & quotations xiao@ahtyck.com +86 180 1992 6927 WhatsApp Get a Quote
Anhui Tongyi Measurement and Control Technology Co., Ltd. Logo TYCK InstrumentsAnhui Tongyi Measurement and Control Technology Co., Ltd. +86 180 1992 6927

TYCK PRIME Pressure Measurement Series

TYCK PT510 High-temperature Pressure Transmitter

TYCK PRIME series · Configurable industrial instrument

TYCK PT510 High-temperature Pressure Transmitter
Special Pressure Transmitters

TYCK PT510 High-temperature Pressure Transmitter

TYCK PRIME series · Configurable industrial instrument

SKU

Model Selection

2 configurations

Select a SKU to review its name and image. Technical values are released only after engineering verifies the controlled source.

Selected Model

PT510 Configurable VersionPT510-CONFIG
Specifications

Held for engineering verification. Submit the application conditions to receive the controlled values.

Consult Selected SKU

Product Overview

Product Description

The TYCK PT510 is a pressure platform for steam, hot oil, boiler and other elevated-temperature services requiring thermal isolation review.

Typical application contexts include Steam service, Boiler and heat-transfer systems, Hot-oil and heated process lines. Final suitability depends on the actual medium, operating envelope, installation and selected SKU.

Selection focus

  • Process and ambient temperature cycle
  • Cooling or condensation arrangement
  • Seal and fill-fluid configuration
  • Pressure range and connection

Limitations

  • There is no single temperature limit for every configuration.
  • Direct installation on steam must be engineered.

Final dimensions, ratings, materials, output, certification and supply scope are configured for the application and confirmed in the quotation.

PRODUCT DATA

Technical Facts

Use these comparable fields to shortlist the product. The selected SKU, controlled datasheet and TYCK quotation confirm the ordered range, accuracy, materials, connection and output.

Engineering verification in progress

Numeric performance and configuration values are held in the internal product record until TYCK engineering verifies the source and approves this product. Send the application conditions to receive a controlled selection and quotation.

SKU Matrix

Available Models

2 configurations. Each SKU has an independent parameter set in the CMS; values are published only after technical verification.

SKU CodeModelSpecificationsUnit
PT510-CONFIGPT510 Configurable VersionHeld for engineering verification—
PT510-STD-REVIEWPT510 Standard Configurable VersionHeld for engineering verification—

APPLICATION REVIEW

Selection inputs and installation checks

These checklists identify the information still required; they do not add unverified performance claims to this product.

Provide process and ambient temperature cycle, cooling or condensation arrangement, seal and fill-fluid configuration, pressure range and connection for technical review.

Selection inputs to send

  1. Pressure taskState gauge, absolute or differential pressure and the normal, minimum and maximum working range.
  2. Process mediumIdentify the medium, concentration or composition and any corrosion, solids, crystallization or pulsation.
  3. Operating envelopeProvide process and ambient temperature, static pressure where relevant, and normal plus upset conditions.
  4. Mechanical interfaceConfirm process connection, wetted materials, mounting, impulse line or seal arrangement where applicable.
  5. Electrical and project scopeConfirm power, output, communication, area classification, required documents, quantity and destination.

Installation review before order

  • Confirm connection, orientation, clearance and maintenance access against the site drawing.
  • Verify wetted materials, seals and pressure or temperature boundaries for the selected configuration.
  • Review vibration, ambient exposure, enclosure location and cable route.
  • Confirm power, grounding, signal wiring and any isolation or barrier arrangement.
  • Use the selected model installation manual and approved project drawing before installation or commissioning.

Confirmation boundary: final model, materials, ratings, connection and supply scope must come from the selected SKU, controlled documentation and formal quotation.

Send This Selection Brief

RELATED PATHS

Solutions and technical resources

Use these internal guides to describe the application before requesting a specific configuration.

FAQ

Frequently Asked Questions

These answers support initial selection. Confirm final performance against the selected SKU and technical documents.

What is the primary selection focus for TYCK PT510?

Confirm process and ambient temperature cycle, cooling or condensation arrangement, seal and fill-fluid configuration before choosing a configuration.

Where is TYCK PT510 typically considered?

Initial application contexts include Steam service, Boiler and heat-transfer systems, Hot-oil and heated process lines; final suitability still requires project data.

Can the final PT510 specification be confirmed from this page?

No. Ratings, materials, connections, output and approvals must be confirmed against the selected SKU and controlled technical documents.

Related Products

All Products →